Water-Based Printhead For Epson i3200-A1(Black)

1. The I3200-A1 Water is a cost-effective 1.33 inch-wide MEMs head series providing high productivity and high image quality with 600dpi high-density resolution. This printhead is suitable for water based inks. The head included the manifold.
2. Structurally, the I3200-A1 and I3200-A1 HD prinheads are the same heads, both with 8 rows of 400 nozzles.
3. But the two heads are absolutely NOT interchangeable, each printer can only run the type of head for which it was designed.
4. The I3200 has support for 4 colours, so there are 4 inputs (nipples) on the manifold to which the dampers can be connected, and each colour is emitted by a pair of nozzle rows.
5. The Epson i3200 HD has support for 8 colours, so there are 8 inputs (nipples) on the manifold to which the dampers can be connected, and each colour is emitted by a single nozzle row.

Specifications:
1. Ink Type : Aqueous
2. Type : PrecisionCore MicroTFP printhead
3. Width x Depth x Height: 69.1 x 59.4 x 35.6 mm
4. Weight: 82g
5. Number of nozzle: 3200
6. Nozzle pitch/nozzle row: 1/300 inch
7. Nozzle rows: 8 rows
8. Nozzle Resolution: 300 noi/row 600 npi/2 rows
9. Max. number of colour inks: 4 colours
10. Effective print width: 33.8 mm (1.33 inches)
11. Droplet ejection performance:
Binary: 6 plat 43.2 kHz
3 levels grey scale: 6.3, 12.3 pl at 21.6 kHz
4 levels grey scale: 3.8, 6.1, 9.4 pl at 21.6 kHz
Viscosity range: 3-4 mPa·s